Epson Stylus Sx 218 Wic Reset Keygenl
How to Reset Epson Stylus Sx 218 Printer with WIC Reset Utility
If you have an Epson Stylus Sx 218 printer that shows an error message like "The printer's ink pads are at the end of their service life" or "A printer's ink pad is at the end of its service life. Please contact Epson Support", you may need to reset the waste ink pad counter using a software tool called WIC Reset Utility. WIC Reset Utility is a program that can reset the waste ink pad counter of many Epson printers, including the Epson Stylus Sx 218. It can also check the ink level, read and write serial number, and perform other functions.
In this article, we will show you how to reset your Epson Stylus Sx 218 printer with WIC Reset Utility and how to replace or clean the waste ink pads periodically to prevent them from overflowing and damaging your printer.
DOWNLOAD: https://t.co/QjLFHucQf3
What is WIC Reset Utility?
WIC Reset Utility is a software tool that can help you fix many problems with your Epson printer. It can reset the waste ink pad counter, which is a feature that counts the number of pages printed and the amount of ink used by the printer. When the waste ink pad counter reaches a certain limit, the printer will stop working and display an error message, indicating that the waste ink pads are full and need to be replaced or cleaned.
WIC Reset Utility can also check the ink level, read and write serial number, make EEPROM dump backup, and perform other functions. It supports many models of Epson printers, such as Artisan, Expression, Stylus, WorkForce, and more. You can download WIC Reset Utility from [here] and install it on your computer. You can choose the version for Windows, Mac OS, or Linux.
How to Reset Epson Stylus Sx 218 Printer with WIC Reset Utility?
To reset your Epson Stylus Sx 218 printer with WIC Reset Utility, you need to follow these steps:
Download WIC Reset Utility from [here] and install it on your computer.
Connect your Epson Stylus Sx 218 printer to your computer with a USB cable and turn it on.
Run WIC Reset Utility and select your printer model from the drop-down list.
Click on "Read waste counters" button to check the current value of the waste ink pad counter. If it shows more than 100%, it means that your printer needs to be reset.
Click on "Reset waste counters" button and enter the reset key. You can buy a reset key online from [here] or use a free trial reset key that will reset your printer to 80% one time only. You can get a free trial reset key from [here].
Click on "OK" button and wait for the program to reset your printer.
Turn off your printer and then turn it on again.
Check the waste ink pad counter again to make sure that it has been reset successfully.
Congratulations! You have successfully reset your Epson Stylus Sx 218 printer with WIC Reset Utility. Now you can continue to use your printer without any error messages.
How to Replace or Clean the Waste Ink Pads of Epson Stylus Sx 218 Printer?
WIC Reset Utility is a useful tool that can help you fix many problems with your Epson printer. However, it is not a permanent solution. The waste ink pad counter will increase again as you use your printer. Therefore, you should also replace or clean the waste ink pads periodically to prevent them from overflowing and damaging your printer.
To replace or clean the waste ink pads of your Epson Stylus Sx 218 printer, you need to follow these steps:
Turn off your printer and unplug it from the power source.
Open the printer cover and locate the waste ink pads. They are usually located at the bottom of the printer, under the print head.
Carefully remove the waste ink pads from the printer. You may need to use a pair of tweezers or a screwdriver to do this.
If you want to replace the waste ink pads, you can buy new ones online or from an authorized Epson service center. If you want to clean the waste ink pads, you can wash them with water and let them dry completely.
Put the waste ink pads back into the printer and close the printer cover.
Connect your printer to your computer with a USB cable and turn it on.
Run WIC Reset Utility and select your printer model from the drop-down list.
Click on "Initialization" button and wait for the program to initialize your printer.
Check the waste ink pad counter again to make sure that it has been reset to zero.
You have successfully replaced or cleaned the waste ink pads of your Epson Stylus Sx 218 printer. Now you can enjoy your printer without any worries.
Conclusion
In this article, we have shown you how to reset your Epson Stylus Sx 218 printer with WIC Reset Utility and how to replace or clean the waste ink pads periodically. We hope that this article has been helpful for you and that you have learned something new. If you have any questions or comments, please feel free to leave them below. Thank you for reading!